How to Clean Chainsaw Rust-Final Solutions

You must have a good quality chainsaw, it is a powerful tool for cutting engine-driven wood. This machine not only saves you time, it also reduces the stress on your body.

However, there is a well-known problem with this device called rust. If you become accustomed to chainsaw rust cleaning and have the proper knowledge, you will be able to deal with this problem very easily.

All tools made of iron have to face the problem of rust. Which is very annoying and you know, chains are also made of iron, Rusting in these severely affects the efficiency of the chainsaw.

You need to use the technique so that you can use the tool for a long time without any problem. You need to use some simple methods to remove rust.

Iron’s Enemy; Rust

We will know about our enemy before we start. Then I can easily fight against rust.

It occurs due to chemical reactions between iron, water, and oxygen. When iron water is in contact with air for a long time, it is gradually covered by a layer of reddish-brown chalky substance, He is called rust.

Iron rust is converted through an oxidation process. For him, the more rust there is, the more iron is lost. Unfortunately, in the end things made of iron lose functionality.

If you dry well with a cloth after using iron tools, you can reduce the rust-corrosion level. And you can use your tools for a long time, without damaging the tools.

Rust removal is a very difficult task after washing the tools, but rust removal can be easier if some specialized measures are taken.

Initially, you need to find a solution, which creates a chemical reaction with the rust and separates it from the iron surface.

Finding these solutions is not a difficult task, believe it or not, you can pick them up from any store and even solve them yourself with household items.

It will be easier when you know it well.

Here is the necessary guide on how to clean chainsaw rust. If you want to own a chainsaw as well as a cordless drill, here is a guide to choosing the best cordless drill under $100.

Some Simple Methods: How to Clean Chainsaw Rust

There is an idea about rust and how it is converted into iron. We mentioned earlier how to clean rust from chainsaw, now I will try to understand to you how to clean rust from chainsaw well.

We will do our best to give you an idea of the different solutions and methods that are needed to remove the chainsaw rust. So let’s look at ways to remove rust from chainsaws:

What you’ll need:

Before you start the cleaning process you need to have some of the necessary materials at hand. You will need the following tools:

  • Facemask
  • Hand gloves
  • Safety glasses
  • Salt and Lemon juice
  • Dish soap, Potato and salt/baking soda
  • White vinegar
  • Cloth
  • A wire brush/ steel wool / sandpaper/ tinfoil
  • A tray or container of the appropriate size /Aluminum and plastic wrapper
  • Rust remover chemicals
  • Elbow grease

Chainsaw Rust Cleaning

I don’t think you will face any problem if you follow the step-by-step procedure. Now let’s get started on what we need.

Prepare Yourself First

No chain can be more valuable than your safety. So your safety is very important. So start the process by ensuring your safety first.

You should wear gloves to clean the rust. Because rust solution has acidic properties. So wear gloves at the beginning.

don’t forget to wear glasses and a face mask before you start. This is because the fumes will be harmful to your body during the chemical reaction. Wear glasses and a face mask to protect your body.

Separate the Rusted Parts

Inspect the rust parts and separate them from electrical components. Disassemble it by checking the chainsaw.

Prepare the solution for cleaning

You can make these at home or in a store for chemical solutions.

WD40 rust remover, metal glow, Evapo rust remover, naval jelly, iron out root remover are very popular for chemical wrist removers.

You can use Muriatic acid, nitric acid, sulfuric acid, mixed with water. These chemicals can deal with rust.

WD40 rust remover, metal glow, Evapo rust remover, naval jelly, in addition to these you can use things that are used for cleaning and cooking your house. For example baking soda, lemon, white vinegar. These are strong enough to remove rust. You can easily solve the problems with baking soda, lemon, white vinegar.

Apply the Clean and solution

Take a tray or container of a suitable size, if there is any problem to fit the tray in your house, you can also use an aluminum wrapper to make an unfamiliar tray.

So let’s apply the solution now. Note that the solution requires time and individual methods.

Chemical for rust removal

Your chainsaw has a lot of rust and you plan to use your store-bought chemical, make a tray that can withstand the chemical well Check if you can tolerate it well.

Different methods of the solution may vary, so read the instructions on the chemical purchased from the store carefully and check it thoroughly.

Then apply the chemical spray well on the pepper and wait for about 20 to 40 minutes. Use a good brush after 20 to 40 minutes. Then wipe well with a clean dry cloth, continue to do this until all the rust is removed.

Elbow Grease

Rinse well with water and then dry it. Clean with a wire brush and a little elbow grease. If it is not rust-free, keep doing it again and again.

Here is the necessary guide on how to clean chainsaw rust. Do you want to know how to make edges with a curved shaft trimmer like a chainsaw rust cleaning guide? Don’t worry, we have also published a guide on how to make edges with curved shaft trimmers. Read here.

Baking Soda

Baking soda is popular in the market for rust removal. Mix baking soda and water well.

Once well mixed, apply it well on the rusted area. And leave in a safe place for about 2 hours. Then brush and rinse well with water. After the rust is gone, dry it in the sun for a while.

White Vinegar

White vinegar is best on the market for rust. Apply white vinegar on the affected area and keep in a safe place for 1 to 2 hours.

The equipment should be cleaned after 1 to 1 hours. For this, clean it well with a brush and water. When the water is clear, wipe it in the sun or with a good cloth.

Salt and Lemon Juice

Did you know before? Lemon juice and salt are very effective for pepper. It works beyond your imagination.

Although rust does not last for a short time, it does take a long time to rust, so lemon juice and salt play a big role in removing small rust.

Apply salt on the rusted area then spray more lemon juice on top of the salt. Wait 3 hours after spraying.

Then continue to clean thoroughly with a lemon peel or wire brush until clean. When it is clean, wash it with water and wipe it well with a clean cloth.

Dish soap, Potato and salt/baking soda

Potatoes contain lemon-like acid which makes it easy to clean rust. Potatoes, salt, dish soap can remove a lot of rust.

Cut a potato well. Then mix the potato, salt, dish soap well. Then mix with chopped potatoes and keep rubbing on the pepper.

After the rust is gone, clean it with water and a brush. Then wipe with a dry cloth or dry in the sun.

Engine Cleaning

Using the methods for the engine can damage the engine. So it’s not okay to take your risk,

You can use a bowler, although it can put you in a tiring situation but you have to do it in the interest of protecting your engine.

Chainsaw Re-assemble

If everything is clean, dry each part well in the sun. Then when it is dry, gather it all and check if everything is OK. If everything is OK then you can start working again as before.


From the article, do you understand well how to clean the rust?

We’ve tried our best to give you a simple guide. I believe you will have no more problems if you follow the steps without making any mistakes. You can easily clean the rust.

11 thoughts on “How to Clean Chainsaw Rust-Final Solutions”

  1. Thank you for every other informative site.
    Where else may just I get that type of info written in such an ideal means?
    I have a mission that I am simply now operating on, and I’ve been at the glance
    out for such information.

  2. whoah this blog is great i really like studying your articles.
    Keep up the good work! You recognize, a lot of individuals are searching around
    for this info, you could aid them greatly.

  3. Hello! Someone in my Facebook group shared this website with us so I came to
    check it out. I’m definitely loving the information. I’m bookmarking and will be tweeting this to
    my followers! Terrific blog and terrific design and style.

  4. Nice post. I used to be checking continuously this blog and I’m impressed!

    Extremely useful information specifically the final section 🙂 I maintain such info much.
    I was looking for this particular information for a very lengthy
    time. Thanks and best of luck.


Leave a Comment